Radiator Descaler Supplier

Radiator, Engine and Boiler :

De Scaler removes the dirt, grease, scale, grime & solder from the engine cooling system. It  remove the rust deposits from the neglected part of the cooling systems as the rust deposit can erode the cooling system and efficiency can be reduced drastically to restrict the cooling flow and may reduced heat transfer which can lead to possible over heating of the system and brake down that can it occur. Thus costly repair has to be done. It is designed in such a way not only clean radiator but also from the engine blocks and head to operate more efficiently. It is a powerful cleaning agent not only for the automobile engine but can be used for the steam tube and boiler tube etc. It not only clean the clogs of the system but also keep the system in order to run for a longer period. It clean the system fast easy and safely without harming any part of the cooling system.

Specification :

• Appearance - Blue Colour Liquid
• Specific Gravity - > 1.0
• PH - 1.0 to 2.0

Direction :
Add complete content (250 ml) bottle to radiator & run engine 10 to 30 minutes to ensure the through cleaning. Flush the cooling system with water until runs clear. Drain the system and add proper amount of coolant.

Type :

• Acidic Descaler - For Heavy scales and dirt (PH : 1.0 to 3.0)
• Basic Descaler (Conditioner) - For Light scale and dirt (PH : 9.0 to 12.0)

Packing : 250 ml, 1 Ltr, 50 Ltr & 210 Ltrs.

Radiator Freshener :
Automobile engines and other internal combustion engines are commonly cooled by liquid cooling systems. A common problem in liquid cooling systems is rust. As the coolant is circulated through the engine and the radiator, rust forms and clogs the cooling system, reducing the efficiency of the system. The most common preventative measure is to flush the coolant from the cooling system periodically. This operation is time consuming, unpleasant, and relatively expensive. Radiator conditioner is so designed that it has to be added in running to the coolant in order to retard the formation of rust and other detrimental materials like scale, solder boom etc; Radiator conditioner is not only retard the formation of scale, rust but also remove Or dissolve them to increase the efficiency of cooling system. Radiator conditioner is also reduced the flushes, and break downs of engine. It is compatible to the all metal parts and rubber and easy to apply. Radiator conditioner is also not react with coolant.

Direction :

• To be used after use of  Acidic Descaler (PH - 1.0 to 3.0)
• Add complete content (500 ml to 1 Ltr) bottle to radiator depending upon the sump capacity & run engine 10 minutes to ensure the through cleaning. Flush the cooling system with water until runs clear. Drain the system and add proper amount of coolant.

Packing : 500 ml, 1 Ltr, 10 Ltr.